|Payment Type:||L/C,T/T,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CFR,CIF,EXW|
|Min. Order:||1 Piece/Pieces|
|Delivery Time:||4-7 Days|
|Packaging:||Plastic bag, Box, Carton, Pallet|
|Productivity:||300000 pcs per month|
|Place of Origin:||China Ningbo|
|Supply Ability:||70000 pcs per week|
Model No.: ADK11-15
CKD Type 1/2'' ADK11-15A/15G/15N Solenoid Valve
Our CKD Type 1/2'' ADK11-15A/15G/15N Solenoid Valve is a diaphragm structure solenoid valve, but many customers do not know enough about the solenoid valve, especially the sealing material of the solenoid valve is relatively unfamiliar. Now we simply explain the different media to choose different seal. Generally, the normal temperature is 0~100°C, the pressure is not more than 2.5MPa, it is not a corrosive medium. Generally, nitrile rubber (NBR) is used. The weak corrosive medium is made of fluororubber (FKM, VITON). The pressure is too high. Polytetrafluoroethylene is used. When the temperature is 120~280°C, the poly is used. Tetrafluoroethylene, more than 280 ° C, depending on the pressure, sealed with graphite or copper.
Individual specifications of CKD Type 1/2'' ADK11-15A/15G/15N Brass Solenoid Valve:
|Item||Port size||Orifice size||Min working pressure diff.(MPa)||Max working pressure diff.(MPa)||Rated voltage||Weight (Kg)|
|Model No.||Air||Water, Kerosene||Oil (50mm²/s)|
|Normally Closed (NC) type|
|ADK11-8||1/4''||12mm||0||1||0.7||1||0.7||0.7||0.6|| 100 VAC 50/60 Hz |
110 VAC 60 Hz
200 VAC 50/60 Hz
220 VAC 60 Hz
|Normally Open (NO) type|| |
Common specifications of DN15 ADK11-15A CKD Type Brass Solenoid Diaphragm Valve:
|Item||Standard specifications||Optional specifications|
|Working fluid||Air, Low Vacuum, Water, Paraffin, Oil||Hot water|
|Working pressure differential range (MPa)||0 to 1.0 (refer to max. working pressure differential in individual specifications.)|
|Max. working pressure (MPa)||2|
|Withstanding pressure (water) (MPa)||4|
|Fluid temperature °C||-10 to 60||-10 to 90|
|Ambient temperature °C||-10 to 60|
|Heat proof class||B||H|
|Atmosphere||Place free of corrosive gas and explosive gas|
|Valve structure||Pilot kick type poppet, diaphragm structure|
|Valve seat leakage (cm³/min)||1 or less (air)|
|Body, sealant||Brass, nitrile rubber(NBR)||Brass, ethylene propylene diene rubber(EPDM)|
Inlet & Mark Display of CKD Type 1/2'' ADK11-15A/15G/15N Solenoid Valve:
Application field of CKD Type 1/2'' ADK11-15A/15G/15N Solenoid Valve:
Solenoid valve selection basis:
Many customers know very little about solenoid valves. The choice of solenoid valve complies with three principles and five parameters. These three principles refer to the principle that the selected solenoid valve should be safe, reliable, applicable and economical. The five parameter requirements are pipe parameters, fluid parameters, pressure parameters, electrical parameters, operating modes and applicable environmental requirements. Can be freely selected according to user needs.
1. Pipeline parameter
Path size: Diameter (DN) size is determined by internal pipe diameter or flow requirements.
Interface mode: interface mode, general > DN50 should select flange interface, ≤ DN50
2. Fluid parameters
Material: Corrosive liquid: corrosion-resistant solenoid valve and all stainless steel should be used; edible ultra-clean liquid: food grade stainless steel solenoid valve should be used.
Temperature: High temperature fluid: Select a solenoid valve made of high temperature resistant electrical material and sealing material, and choose piston type.
Fluid state: large to gas, liquid or mixed state, especially when the diameter is greater than DN25, must be distinguished.
Fluid viscosity: usually less than 50 cSt can be chosen arbitrarily. If this value is exceeded, a high viscosity solenoid valve should be used.
3. Pressure parameters
Nominal pressure: This parameter has the same meaning as other general purpose valves and is based on the nominal pressure of the pipe.
Working pressure: If the working pressure is low, the direct action or stepwise direct action principle must be used; when the minimum working pressure difference exceeds 0.04Mpa, direct action, stepwise direct action and pilot operation can be used.
4. Electrical parameters: The voltage specifications of AC220V and DC24 should be as convenient as possible.
5. Operation mode: normally closed, normally open or continuously energized;
When the solenoid valve needs to be opened for a long time, the duration exceeding the closing time should be normally open.
If the opening time is short or there is not much time to open and close, select the normally closed type.
However, some safety protection working conditions, such as furnace kiln flame monitoring, cannot be properly selected, and long-term power supply should be selected.
6. Environmental requirements: explosion-proof, non-return, manual, waterproof fog, water shower, diving
Explosive atmosphere: The corresponding explosion-proof solenoid valve must be used.
When the fluid in the pipe has a reflow phenomenon, a solenoid valve having an inspection function can be selected.
When manual on-site operation of the solenoid valve is required, a manual function solenoid valve can be selected.
For outdoor installations or dusty applications, use waterproof and dustproof types (protection level higher than IP54).
For fountains, a diving solenoid valve must be used (protection level higher than IP68).
Welcome to your any question and inquiry!
*Brando is a professional manufacturer and designer of solenoid valve, solenoid coil and solenoid valve armature assembly, located in Ningbo, China. Our main products include armature assembly, solenoid coil, brass solenoid valve, stainless steel solenoid valve, plastic solenoid valve, pneumatic solenoid valve, pulse jet valve, diaphragm repair kit, pulse controller, injector rail and can serve customers from various industries. Our company has been producing for more than 10 years, and cooperates with different customers such as oil & gas, chemical industry, water treatment, food & beverage, medical system and so on.
*Brando maintains its high position in the industrial manufacturing. The advanced lathes and milling machinery are introduced, and from materials procurement to finished product and assembly, it is fully automated and controlled by computers, to improve product quality, and to continuously increase production and delivery efficiency.
*Brando has fully adopted the ISO-9001 quality management system and introduced the most advanced precision equipment for product inspection, such as digital pressure gauges, computer applications, air leak testers, pressure testers and flow testers.
1. Customized Design and Production: Brando can design and manufacture customized solenoid valves, solenoid coils and solenoid valve armature components to meet your specific needs and applications. We can provide services from small air treatment devices to large fluid systems.
2. Quality Assurance: In addition to designing and manufacturing high-quality products, Brando also provides 100% testing services for all components to ensure that they achieve the best performance under the best performance and to ensure that it runs well in your project.
3. Delivery and After-sales Service: Brando provides large inventory and on-time delivery within 5 to 10 days. We also provide unparalleled after-sales service and 1 year warranty for all products.
1. Solenoid Valve Coil
2. Solenoid Coil Connector
3. Solenoid Valve Armature Assembly
4. 5/2, 5/3, 3/2, 2/2 Way Pneumatic Solenoid Valve
5. Pneumatic Hose Fitting
6. Refrigeration Solenoid Valve
7. Dust Collector Pulse Jet Valve
8. Diaphragm Repair Kit
9. Pulse Controller
10. Air Compressor Auto Drain Valve
11. Solenoid Valve Timer
12. Brass Solenoid Valve
13. Stainless Steel Solenoid Valve
14. Plastic Solenoid Valve
15. LPG CNG Injector Rail
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing